1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Comments on Gigapan: St. Anthony Falls, Minneapolis

Gigapan Comments (5)

Toggle Minimize gigapan_comment
  1. Tom Nelson

    Tom Nelson (June 06, 2009, 10:29PM )

    Thanks for the tip, Texas! Turning off image stabilization really helped.

  2. David Engle

    David Engle (June 02, 2009, 11:43AM )

    *Do not* use IS or VR or whatever it may be called on any camera when using the robot.

  3. Roelof van der Schaaf

    Roelof van der Schaaf (May 31, 2009, 07:24AM )

    I never use a delay, I set the F-stop and exposure time and that's it. 1/8 second might be a long exposure time anyway. 48 images are not a lot, maybe that is part of the problem? My Gigapans are normally around 240-480 pictures depending on the situation and my well known patience.

  4. Tom Nelson

    Tom Nelson (May 31, 2009, 07:03AM )

    I used a 4-second delay on the GigaPan with a 2-second self-timer and 1/8 second camera exposure. There is vertical movement in all the top images and I deleted them. As you can see the other images are fine. I'll experiment with a longer GigaPan delay.

  5. Roelof van der Schaaf

    Roelof van der Schaaf (May 31, 2009, 06:52AM )

    Hello, I don't completely understand the line: the GigaPan blurred all the top-row images. It must have been your camera I think. I don't see huge problems in the stats either. Is the problem that the sky is overlapping creating vertical lines in the top pictures? Blurring can happen when the auto focus is on but you can switch that of in the Powershot. And I like rivers in combination with cities just a way to say I like the twilight picture.