Hi,

With my previous PC (Windows Vista 32bit, 2GB RAM and Stitch 1.0) I managed to assemble panoramic. It’s perfect.

I have a new PC (Windows 7 64-bit, 64GB RAM, and Stitch 1.0 et 2.0), Stitching will stop being calculated :
Reading the log.txt, this is written at the end:

2012-05-05 15:54:41 {16} [ console ] : * Greedy feature-based alignment results:
2012-05-05 15:54:41 {16} [ console ] : Overall rms error= 10.5554
2012-05-05 15:54:41 {0} [ console ] : [Time 20120505-155441, RAM usage 275.628 MB, peak 287.22 MB, Progress 11%]
2012-05-05 15:54:41 {16} [ console ] : Global error is 1061.91 pixels RMS
2012-05-05 15:54:41 {16} [ console ] :

• Finding GigaPan model
  2012-05-05 15:54:41 {16} [ console ] : Iteration 1, error = 16.7707
  2012-05-05 15:54:44 {16} [ console ] : Iteration 101, error = 3.50192
  2012-05-05 15:54:47 {16} [ console ] : Iteration 201, error = 3.0712
  2012-05-05 15:54:48 {16} [ console ] : Iteration 1, error = 3.07074
  2012-05-05 15:54:50 {16} [ console ] : Iteration 1, error = 3.07074
  2012-05-05 15:54:52 {16} [ console ] : Gigapan model found: GigapanModel:
  pan_increment: 2.94077 degrees
  tilt_increment: 1.55972 degrees
  equator_row: -8.64143
  camera_roll: -0.000280552

2012-05-05 15:54:52 {16} [ console ] : Global error is 111.724 pixels RMS
2012-05-05 15:54:52 {16} [ console ] : * Finding extrinsic models from GigaPan model: start
2012-05-05 15:54:52 {0} [ console ] : [Time 20120505-155452, RAM usage 275.628 MB, peak 287.22 MB, Progress 11%]
2012-05-05 15:54:52 {0} [ console ] : [Time 20120505-155452, RAM usage 275.628 MB, peak 287.22 MB, Progress 11%]
2012-05-05 16:01:36 {0} [ console ] : ReportWizard::files_for_upload: redirecting log to: E:\01.data\log20120505-160136.txt
2012-05-05 16:01:36 {0} [ console ] : Redirecting log to: E:\01.data\log20120505-160136.txt

Whether it’s with Stitch 2.0 and Stitch 1.0, the result is the same, and therefore I can not seem to pan assembly.

Please HELP !

Xavier,

While I can’t help you directly with this, I wonder if you’d be interested in sharing the full specifications of the machine you’re stitching this on. I see you have 64GB of memory and with that I’m assuming you’ve probably put this together or had it built to your specifications. I’m working on building a unit now myself and struggling with the components trying the balance cost and performance. Some additional details may also help the gigapan guys troubleshoot this. Most likely you’ll get a response once they are in tomorrow.

Bob